Integra RDV-1.1 - Manual (Page 64)

64
Advanced Playback —Continued
With the Last Memory function you can resume play-
back from where you left off even if the disc has been
removed and the RDV-1.1 has been set to Standby. Last
Memory also remembers the soundtrack and subtitle set-
tings you were using.
Notes:
• The Last Memory function can store the last point for
up to six DVDs. When you set the Last Memory func-
tion for a seventh disc, the first disc’s settings are
deleted.
• The Last Memory function can store the last point for
only one VCD, and that point will be lost when the
disc is removed.
• The Last Memory function may not work properly
with VCDs that support PBC.
• The Last Memory function will not work while a
menu is being displayed onscreen.
• The Last Memory function may not work with some
DVDs.
• If you inadvertently turn off the RDV-1.1 during play-
back, you can resume playback from the last point
simply by pressing the Play [
] button.
You can display various information about a disc, title,
chapter, group, or track onscreen and on the RDV-1.1’s
display.
Last Memory
1 During playback, press the
[Last Memory] button.
The last memory point for the disc is
stored, the LAST M indicator appears,
and “Last Mem” appears on the display.
If the [Last Memory] button is pressed
again, the last memory point is updated.
2 To stop playback, press the Stop
[
] button once or twice.
Now you may remove the disc
and turn off the RDV-1.1.
3 To resume playback, load the
disc, and then press the Play [
]
button.
The Last Memory dialog box appears.
+10 0 Clear
1 2 3
4 5 6
7 8 9
Input I
+
-
Enter
Set up Retu rn
L 4
L 2 L1 V Off V In
Aspect A-B Repeat
Rsltn Angle Subtitle Audio
L 3
To p M enu Men u
VOL
+
-
V3
TV
Input D M S
DVD Amp VCR
DVD V1 V 2
LM RD
Zoom CH
L Mode
Learning
Search Memory Dimmer Amp Input
Display
Audio
Sel
Zoom On Picture Control
Random Step/Slow
Muting
Angle Subtitle Audio
Aspect A-B Repeat
On Standby T V
T V CH
T V VOL
RC-561DV
Last Memory
Resolution
Mode
Amp Input
Rec
Open/Close
Video Input Video Off
Last Memory
Enter
Display
Display
VCD DVD-V
LM
Last Memory
Remote controller
Remote controller
Remote controller
4 To resume playback from the last
memory point, select Yes, and
then press [Enter].
To start playback from the beginning,
select No, and then press [Enter].
To start playback from the beginning
and delete the last memory point, select
Memory Clear, and then press [Enter].
Displaying Information
During playback, press the [Dis-
play] button repeatedly.
The information displayed depends on
the type of disc. See the following
tables.
Enter
Remote controller
VCD CD MP3 DVD-V DVD-A SACD DVD-VR
Display
Remote controller