Furuno FM-4000 - Manual (Page 59)

Page 59 FM-4000
12.5 TRUE MAGNETIC CHANGE (NAV DISPLAY)
The GPS COG (Course Over Ground) indication can be shown in True or
Magnetic.
1. Press and hold down the [CALL(MENU)] key until
the “Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup ” menu appears.
2. Press the [ENT] key, then use the CHANNEL selec-
tor knob to select “Magnetic Magnetic Magnetic Magnetic Magnetic .”
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “Mag-
Mag- Mag- Mag- Mag-
netic netic netic netic netic ” or “True True True True True .”
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode,
press the [16/9] key.
12.6 PRIORITY CHANNEL
You can set the priority channel to use when priority scan is enabled.
1. Press and hold down the [CALL(MENU)] key until
the “Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup ” menu appears.
2. Press the [ENT] key, then use the CHANNEL selec-
tor knob to select “Priority CH Priority CH Priority CH Priority CH Priority CH .”
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select the chan-
nel to be a priority.
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode,
press the [16/9] key.