Furuno FM-4000 - Manual (Page 14)

FM-4000 Page 14
8.6 CHANGING THE TIME INDICATION
Set the radio to show UTC time, or local time with the offset inputted in section
“8.5 CHANGING THE GPS TIME.”
1. Press and hold down the [CALL(MENU)] key until
the “Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup ” menu appears.
2. Press the [ENT] key, then use the CHANNEL selec-
tor knob to select “Time Display Time Display Time Display Time Display Time Display ”.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “UTC
UTC UTC UTC UTC ” or
“Local Local Local Local Local .”
5. Press the [ENT] key to store the selected setting.
6. Press the [CLR] key to return to the “Radio Setup
Radio Setup Radio Setup Radio Setup Radio Setup ”
menu, then press the [CLR] key again to return to
radio operation.
8.7 CHANGING THE COG INDICATION
GPS Course Over Ground can be shown in True or Magnetic bearing. To change
the COG indication, do as follows:
1. Press and hold down the [CALL(MENU)] key until
the “Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup ” menu appears.
2. Press the [ENT] key, then use the CHANNEL selec-
tor knob to select “Magnetic Magnetic Magnetic Magnetic Magnetic ”.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “Mag-
Mag- Mag- Mag- Mag-
netic netic netic netic netic ” or “True True True True True .”
5. Press the [ENT] key to store the selected setting.
6. Press the [CLR] key to return to the “Radio Setup
Radio Setup Radio Setup Radio Setup Radio Setup ”
menu, then press the [CLR] key again to return to
radio operation.