3 time display, 4 sog ( speed over ground ) unit – Furuno FM-4000 User Manual
Page 58
FM-4000
Page 58
12.3 TIME DISPLAY
The time can be shown in local or UTC time. The time display requires con-
nection of a GPS receiver.
1. Press and hold down the [CALL(MENU)] key until
the “Radio Setup
Radio Setup
Radio Setup
Radio Setup
Radio Setup
” menu appears.
2. Press the [ENT] key, then use the CHANNEL selec-
tor knob to select “Time Display
Time Display
Time Display
Time Display
Time Display
.”
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “UTC
UTC
UTC
UTC
UTC
” or
“Local
Local
Local
Local
Local
.”
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode,
press the [16/9] key.
In the local time mode, the display shows the time by
the 12-hour system, while the display shows the time by the 24-hour system in
the UTC mode.
12.4 SOG (SPEED OVER GROUND) UNIT
The SOG indication can be shown in knot, mph or kph.
1. Press and hold down the [CALL(MENU)] key until
the “Radio Setup
Radio Setup
Radio Setup
Radio Setup
Radio Setup
” menu appears.
2. Press the [ENT] key, then use the CHANNEL selec-
tor knob to select “SOG Unit
SOG Unit
SOG Unit
SOG Unit
SOG Unit
.”
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select desired
unit.
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode,
press the [16/9] key.
(“LOCAL” mode)
(“UTC” mode)