Furuno FM-4000 User Manual

Page 47

Page 47

FM-4000

6. Press applicable key to enter the first letter of the

name of the group you want to reference in the di-
rectory.
Example: Press the [2(MEM)] key repeatedly to
toggle among the seven available characters asso-
ciated with that key: 2

....

If you enter a wrong character, pres the [CLR] key
to delete the wrong character.

7. Press the [ENT] key to store the first letter in the name.
8. Repeat steps 6 and 7 to complete the name. The name can consist of up

to 11 characters. If you do not use all 11 characters, press the [ENT] key to
move to the next space. This method can also be
used to enter a blank space in the name. If you en-
ter a wrong character, press the [H/L] key until the
wrong character is selected, then enter the correct
character.

9. After the 11th letter or space has been entered, press and hold the [ENT]

key to advance to the Group MMSI (Maritime Mo-
bile Service Identity Number) number entry.

10. Enter the desired number. If you enter a wrong num-

ber, press the [H/L] key until the wrong number is
selected, then enter the correct number.

11. To store the data entered, press and hold the [ENT]

key.

12. To enter another group address, repeat steps 4

through 11.

13. Press the [CLR] key twice to return to the “Radio Setup

Radio Setup

” menu, then press

the [CLR] key again to return to radio operation.

11.7.2 Transmitting a Group Call

Using Pre-Programmed Vessel
1. Press the [CALL(MENU)] key to show the “DSC

DSC

Call Menu

.”

2. Turn the CHANNEL selector knob to select

“Group

Group

.” (To cancel, press the [CLR] key.)

3. Press the [ENT] key. The transceiver beeps,

and the “Group directory” appears.

4. Turn the CHANNEL selector knob to select the

“Group” you want to contact.

5. Press the [ENT] key, then turn the CHANNEL

selector knob to select the operating channel you