Furuno FS-1570 - Manual (Page 79)

5. CALLING, RECEIVING
5-17
10. Rotate the [ENTER] knob to choose communication frequency desired and then push
the [ENTER] knob. (See page 5-6 for details.) NO INFO lets other party choose
communication frequency.
11. Push the [ENTER] knob to open the DSC FREQ menu.
GO TO ALL VIEW
CALL TYPE
GROUP ID
PRIORITY
COM. TYPE
COM. FREQ
: Individual
: 001234567
: Routine
: Telephone
: No infor
CALL
E
ONE
DSC FREQ
: 12M-INTL
$
6 MHZ
8 MHZ
12 MHZ
4 MHZ
2 MHZ
$
16 MHZ
18 MHZ
22 MHZ
25 MHZ
OTHER
Rotate the [ENTER]
knob to select.
OTHER: Special, private channels.
** Compose message **
12. Rotate the [ENTER] knob to choose DSC band desired and then push the [ENTER]
knob. Rotate the [ENTER] knob to choose DSC frequency desired and then push the
[ENTER] knob. (See “How to set DSC frequency” on page 5-7 for details.)
CALL TYPE : GROUP
COM. FREQ : 2164.0 KHZ
COM. TYPE : TELEPHONE
PRIORITY : ROUTINE
GROUP ID : 012345678
DSC FREQ : 2177.0 KHZ
GO TO ALL VIEW
** Compose message **
13. Press the [CALL] key to send the group call (transmission time: about 7 sec.). The
display shows "Group call in progress!" while the call is being sent.
GROUP ID : 012345678
Group
call in progress!
TIME TO GO : 6S
DSC FREQ : 2177.0 KHZ
TELEPHONE
ROUTINE
2164.0 KHZ
14. The radiotelephone screen automatically appears after the call is sent.
15. If you selected TELEPHONE at step 5, communicate by radiotelephone. For NBDP, do
the following
Sending message by NBDP Terminal Unit
1. Press the function key [F3] on the keyboard of the NBDP Terminal Unit to show the
Operate menu.
2. Call Station is selected; press the [Enter] key.
3. DSC is selected; press the [Enter] key.
4. The line will be connected and “Connect” is highlighted. Type and transmit your
message.
5. Press the function key [F10] (BREAK) to disconnect the line.