Furuno FS-1570 - Manual (Page 35)

2 SSB RADIOTELEPHONE
2-11
*** User ch entry **
# UP $ DOWN
00201. TX: 2111.5 RX: 2111.5
00202. TX: 2222.0 RX: 2222.0
00203. TX: 2333.5 RX: 2333.5
00204. TX: 2444.0 RX: 2444.0
00205. TX: 2555.5 RX: 2555.5
SSB
NBDP
DSC
! MODE: " CH: 2-01
6. Rotate the [ENTER] knob to choose appropriate mode among SSB, NBDP and DSC
and then push the [ENTER] knob.
7. Push the [ENTER] knob to open the user channel options window.
*** User ch entry **
! MODE: SSB
# UP $ DOWN
00201. TX: 2101.5 RX: 2101.5
00202. TX: 2202.0 RX: 2202.0
00203. TX: 2303.5 RX: 2303.5
00204. TX: 2404.0 RX: 2404.0
00205. TX: 2505.5 RX: 2505.5
" CH : 2-01
C H : 0
−
0 0
- 256 channels may be registered.
- Band no. setting range is 0-29 and band channel no. range is
01-99.
- For DSC, four channels can be registered per band (2, 4, 6
8, 12, 16, 18, 22, 25).
- "0" band is for DSC frequencies only, and they are registered
under "OTHER." Four channels are available, 01-04.
8. Key in channel no. and then push the [ENTER] knob. For example, press [1], [2], [3],
[4] and then push the [ENTER] knob to enter channel 1234. The channel selected is
highlighted at the top of the screen.
** User ch entry **
! MODE : SSB
# UP $ DOWN
01234. TX: 0.0 RX: 0.0
01240. TX: 12666.0 RX: 13666.0
01241. TX: 12777.5 RX: 13777.5
01242. TX: 12999.5 RX: 13999.5
01250. TX: 12100.0 RX: 13100.0
" CH : 12-34
TX : 0.0 KHZ
RX : 0.0 KHZ
9. Enter TX frequency with the numeric keys.
10. Rotate the [ENTER] knob to choose RX.
11. Enter RX frequency with the numeric keys and then push the [ENTER] knob.
12. The display shows the information entered.
13. Rotate the [ENTER] knob to display all channels entered.