Furuno FS-1570 - Manual (Page 137)

8 NBDP SYSTEM OVERVIEW
8-9
Function key [F6]: System menu
The System menu is mainly for use by technicians and contains diagnostic tests (self test).
To change settings, choose “Change” from the item “Setup” and operate arrow keys to
choose item and option. Press the [Enter] key to register selection and close the menu.
Setup
Slave Delay
BK Timing PreTone
PostTone
Mute Timing PreBK
PostBK
Modem Output Level
MIF Tune
Freeze
AGC
Emission
TX/RX MSG Save
Edit Before sending
Time System
Time & Date
Display Mode
Self Test
Lock Change Default
5 msec (0- 50 msec)
10 msec (0-100 msec)
0 msec (0- 20 msec)
0 msec (0- 20 msec)
0 msec (0- 20 msec)
0 dBm (-30 - +10 dBm)
OFF O N
OFF O N
OFF O N
OFF O N
OFF O N
OFF O N
OFF UTC SMT JST
2002/1/16/10:00:00
Normal Reverse
System
System menu
Setup
Locks, changes settings; restores default system settings.
Slave Delay Sets the length of the slave delay timing in the ARQ mode.
BK Timing PreTone Not used.
BK Timing PostTone Not used.
Mute Timing PreBK Not used.
Mute Timing PostBK Not used.
Modem Output Level
Not used.
MIF Tune
Not used.
MIF Freeze
Not used.
MIF AGC
Not used.
MIF Emission
Not used.
TX/RX MSG Save Turn on to automatically save incoming and outgoing messages to
a floppy disk.
Edit Before Sending "No" transmits keying operation one by one. "Yes" transmits
message only when the [Enter] key is pressed after confirming text
typed.
Time System Chooses time system. SMT is local time and JST is Japan
standard time.