Furuno FS-1570 - Manual (Page 36)

2 SSB RADIOTELEPHONE
2-12
2.6.2 Deleting user channels
Deleting individual user channels
1. At the radiotelephone screen, press the [#/SETUP] key.
2. Rotate the [ENTER] knob to choose USER CH and then push the [ENTER] knob.
3. Rotate the [ENTER] knob to choose ENTRY and then push the [ENTER] knob.
4. Rotate the [ENTER] knob to choose CH and then push the [ENTER] knob.
5. Enter all zeroes for the TX and RX frequencies and then push the [ENTER] knob.
Deleting all user channels
1. At the radiotelephone screen, press the [#/SETUP] key.
2. Rotate the [ENTER] knob to choose USER CH and then push the [ENTER] knob.
3. Rotate the [ENTER] knob to choose ERASE and then push the [ENTER] knob.
4. Rotate the [ENTER] knob to choose YES and then push the [ENTER] knob.
2.7 FAX Enable/Disable
You may enable or disable FAX use as follows:
1. Press the [#/SETUP] key to open the Setup menu.
2. Rotate the [ENTER] knob to choose FAX RX ENABLE and then push the [ENTER]
knob.
3. Rotate the [ENTER] knob to choose ON or OFF as appropriate and then push the
[ENTER] key.
4. Press the [CANCEL] key to close the menu.