Furuno FS-1570 - Manual (Page 102)

5 CALLING, RECEIVING
5-40
PSTN request
call in progress!
TIME TO GO: 7S
TO COAST : 001234567
TEL NO. : 1234567890123456
DSC FREQ : 2189.5 KHZ
10. One of the following three displays appears. (“No response. Try calling again.” Appears
after timer counts down to zero and it means there was no response from the coast
station.)
Waiting for
acknowledgement.
TIME TO GO: 25S
DSC FREQ : 12577.5 KHZ
FROM COAST : 001234567
TEL NO. : 1234567890123456
No response!
Try calling again?
DSC FREQ : 12577.5 KHZ
RE-SEND
FROM COAST : 001234567
TEL NO. : 1234567890123456
Unable acknowledge
call received.
STOP ALARM
FROM COAST : 001234567
TEL NO. : 1234567890123456
BUSY
11. Do one of the following depending on the message shown at step 10.
Waiting for acknowledgement
1) If the PSTN call is accepted, the PSTN connection call is sent (transmission time: about
7 sec.), showing the display below.
PSTN connection
call in progress!
TIME TO GO: 7S
TO COAST : 001234567
TEL NO. : 1234567890123456
TELEPHONE CH 12001
DSC FREQ :
12230.0 KHZ
2) After the call is sent one of the following messages appears.
Waiting for
acknowledgement.
TIME TO GO: 25S
DSC FREQ : 12230.0 KHZ
FROM COAST : 001234567
TEL NO. : 1234567890123456
TELEPHONE CH 12001
PSTN connection
call in progress!
TIME TO GO: 8S
TO COAST : 001234567
TEL NO. : 1234567890123456
TELEPHONE CH 16001
DSC FREQ :
16360.0 KHZ
Waiting for acknowledgement Request for new TX assignment
New channel
3) Then, one of the following displays appears.