Quickspecs – HP ProLiant DL180 G5 User Manual

Page 11

NOTE:

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE:

NOTE:

NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE:

NOTE:

NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE:

NOTE:

NOTE: FIO indicates that this option is a Factory Installable Option.

Step 1: Base Configuration (choose one of the following configurable models)

Hot Plug Models

HP ProLiant DL180 G5 Hot Plug SAS/SATA Rack CTO Chassis

457649-B21

Factory Integrated Model ships with:

One embedded NC105i PCI-E Gigabit Server Adapters (WOL & PXE-capable)

Three available PCI-Express slots:

Slot 1: x8 low-profile/half-height slot

Slot 2 & 3: x4 Full-Height/Full Length

NOTE:

NOTE: Optional PCI-X option kit includes: Slot 1 and 2: full-length/full-height PCI-X
100. PCI-X slots are 64 bits; 133 MHz capable if only one PCI-X card is installed in
the server.

One HP SATA Embedded Cable Kit

750 Watt Power Supply

One Highline IEC Power Cord

4 Non-Hot Plug Fans

Rack (2U), (3.5 in/8.89 cm)

Step 2: Choose Required Options (only one of the following from each list unless otherwise

Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)

noted)

Processors

Quad-Core Intel® Xeon® processor L5420 (2.50 GHz, 50W, 1333MHz FSB)

NOTE:

NOTE: If 2 processors are desired, select one 487901-L21 and one 487901-B21.

487901-L21

Quad-Core Intel® Xeon® processor L5410 (2.33 GHz, 50W, 1333MHz FSB)

NOTE:

NOTE: If 2 processors are desired, select one 491310-L21 and one 491310-B21.

491310-L21

Quad-Core Intel® Xeon® processor E5440 (2.83 GHz, 80W, 1333MHz FSB) Kit,
FIO

NOTE:

NOTE: If 2 processors are desired, select one 466106-L21 and one 466106-B21.

466106-L21

Quad-Core Intel® Xeon® processor E5430 (2.66 GHz, 80W, 1333MHz FSB) Kit,
FIO

NOTE:

NOTE: If 2 processors are desired, select one 458784-L21 and one 458784-B21.

458784-L21

Quad-Core Intel® Xeon® processor E5420 (2.50 GHz, 80W, 1333MHz FSB) Kit,
FIO

NOTE:

NOTE: If 2 processors are desired, select one 458785-L21 and one 458785-B21.

458785-L21

Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 80W, 1333MHz FSB) Kit,
FIO

NOTE:

NOTE: If 2 processors are desired, select one 458786-L21 and one 458786-B21.

458786-L21

Dual-Core Intel® Xeon® processor E5205 (1.86 GHz, 65W, 1066MHz FSB) Kit, FIO

NOTE:

NOTE: If 2 processors are desired, select one 458787-L21 and one 458787-B21.

458787-L21

QuickSpecs

HP ProLiant DL180 Generation 5 (G5)

Configuration Information - Factory Integrated Models

DA - 12903 Worldwide — Version 10 — July 14, 2008

Page 11