Hand Held Products HANDHELD 3800G - Manual (Page 115)

3800g User’s Guide 11 - 9
Data Formatter
Off DFM_EN0 5-5
*On, but Not Required DFM_EN1 5-5
On, Required DFM_EN2 5-5
Alternate Data Formats
1 VSAF_1 5-5
2 VSAF_2 5-5
3 VSAF_3 5-5
Secondary Interface Selections
Enabling the Secondary
Interface
*Disable 2IF_EN0 6-1
Enable 2IF_EN1 6-1
Secondary RS-232 Con-
nection
RS-232 Interface 2IFTYP0 6-2
Secondary Trigger Mode
*Manual Trigger 2IFTRG0 6-2
Automatic Trigger 2IFTRG1 6-2
Presentation Mode 2IFTRG3 6-2
Symbologies
All Symbologies
All Symbologies Off ALLENA0 7-1
All Symbologies On ALLENA1 7-1
Codabar
Default All Codabar
Settings
CBRDFT 7-3
Codabar
Off CBRENA0 7-3
*On CBRENA1 7-3
Codabar Start/Stop Char.
*Don’t Transmit CBRSSX0 7-3
Transmit CBRSSX1 7-3
Codabar Check Char.
*No Check Char. CBRCK20 7-4
Validate, But Don’t Transmit CBRCK21 7-4
Validate, and Transmit CBRCK22 7-4
Codabar Concatenation
*Off CBRCCT0 7-4
On CBRCCT1 7-4
Require CBRCCT2 7-4
Codabar Message Length
Minimum (2 - 60) *4 CBRMIN## 7-5
Maximum (2 - 60) *60 CBRMAX## 7-5
Code 39
Default All Code 39
Settings
C39DFT 7-5
Selection
Setting
* Indicates default
Serial
Command
# Indicates a
numeric entry
Page