Hitachi VM-1600A User Manual
Page 87
TROUBLESHOOTING
87
The "
" indication in the electronic viewfinder
*Try another battery or charge
the flashes to indicate battery is discharged
battery.
.
RECORDING TV PROGRAMS OFF THE AIR
Symptom
Check
Point
&
Correction
The camera/recorder can not go into the recording
*The cassette has had the erase
mode, even when record start/stop button is pressed. prevention tab removed. Stick a
piece
of
cellophane
tape
over
erase
prevention
tab
hole
or
select
a
different cassette.
*Set
"POWER"
switch
to
"CAM"
position.
*Connect
the
camera/recorder
and
TV (orVCR).
PLAYBACK OF PRE-RECORDED CASSETTE
SYMPTOM
CHECK POINT & CORRECTION
“PLAY” button cannot be engaged.
Set the “POWER” switch to
“VIDEO” position.
No picture appears on television
screen when “PLAY” is pressed.
Set the television to the
camera/recorder channel (3 or 4)
depending upon the selected
channel on the RF channel select
switch of the RF converter unit. (TV
is connected to the camera/recorder
by using converter unit.)
Interference on playback picture.
Adjust the tracking using
“TRACKING” control (power zoom
switch).
When you see the playback picture
on your TV, adjust fine tuning knob
on television set to obtain best
picture.
The pre-recorder tape is EP on LP
recording. This camera/recorder is