Charging the ups batteries, Powering up the ups, Installing the erm as a tower – HP R2200 User Manual

Page 27

Installation 27

•

Connect the device power cords to the output receptacles on the rear panel of the UPS

(NA/JPN/TWN model).
-or-

•

Connect devices to the output receptacles on the rear panel of the UPS using the jumper cords

included with the UPS (INTL model).

Charging the UPS batteries

Allow the batteries to charge before putting the UPS into service.

IMPORTANT: Charge the batteries for at least 24 hours before supplying backup power to devices. The

batteries charge to:

•

90% of their capacity within 4 hours

•

100% of their capacity within 24 hours

Powering up the UPS

Press and hold the Power On/Standby button until the UPS beeps. The Power LED illuminates solid green,

indicating that power is available at the UPS output receptacles.

Installing the ERM as a tower

Before installing the unit, review and adhere to all warnings provided in "Precautions (on page