Huffy VP8100 - Manual (Page 13)

07/03 P/N 211636C
13
5. Bounce top (4) and middle (5) pole
assembly onto bottom pole section (6)
using a wood scrap as shown. Bounce
until the top and middle pole assembly no
longer moves toward the taped reference
mark on the bottom pole. NOTE: Pole
sections should have a 3-1/2” (9 cm)
overlap minimum.
6.
Insert bolts (7) into bracket (9) as shown. Install bolt (14) through bracket (9)
and bottom pole section (6) and secure with nut (12) as shown.
4
5
6
WOOD SCRAP
(NOT SUPPLIED)
14
7
9
9
12
6
Holes in top (4) and
bottom pole (6)
sections MUST align
to correctly position
elevator system
toward playing
surface.
IMPORTANT!:
RODS SHOWN ARE
FOR VISUAL
REPRESENTATION
OF ALIGNMENT
AND ARE NOT
SUPPLIED WITH
THE HARDWARE