HP MSA30 DB - Manual (Page 11)

Protocol Support Wide Ultra320 (LVD)
Wide Ultra3 (LVD)
Wide Ultra2 (LVD)
O/S Support Defined by specific HP array controller or SCSI adapter used; please refer to the QuickSpecs
and/or User Guide of the specific array controller or SCSI adapter
Dimensions (HxWxD) Rack 5.2 x 19 x 20.5 in (13.1 x 47.88 x 51.66 cm)
Shipping Dimensions
(HxWxD) Rack 34.25 x 14.5 x 31.25 in (86.31 x 36.54 x 78.75 cm)
Weight Rack 68 lb (30.9 kg)
LED Indicators (on front
panel) EMU Status LED (left)
Enclosure Power LED (middle)
Fault LED (right)
Drive LED Indicators
(on drive trays) Drive LED (top)
On Line LED (middle)
Drive Failure LED (bottom)
Enclosure LED
Indicators (back of unit) I/O Module (top)
EMU (middle)
Power supplies (bottom)
Input Requirements Nominal Line Voltage 110 to 240 V AC
Range Line Voltage 90 to 264 V AC
Line Frequency 47 to 63 Hz
Typical Input Current 2.3A at 120 V AC
Relative Humidity (non-
condensing) Operating 10% to 90%
Shipping 5% to 90%
I/O Module Connector Very High Density Cable Interconnect (VHDCI)
Power 377 Watts per supply (load)
BTU (220 volts) Single power supply 14
drives 1164 BTUs/hour
Single power supply 5
drives 536 BTUs/hour
Single power supply 1
drive 273 BTUs/hour
Dual power supply 14
drives 1232 BTUs/hour
Dual power supply 5
drives 625 BTUs/hour
Dual power supply 1
drive 352 BTUs/hour
Temperature Range Operating 50° to 94° F (10° to 35° C°)
Shipping -40° to 151° F (-40° to 66° C)
NOTE: To maintain proper cooling and airflow, a drive blank or drive must occupy all bays during
operation.
QuickSpecs HP StorageWorks Modular Smart Array 30 Single
Bus or Dual Bus Enclosures
Technical Specifications
DA - 11738 Worldwide QuickSpecs — Version 25 — 6.8.2007 Page 11