Operation – Hunter Fan 47350A User Manual

Page 16

OPERATION

Energy Monitor

energy

Usage

Min

Today

energy

The Energy monitor feature measures and stores the
amount of time the heating and air conditioning sys-
tem operates. Usage can be displayed for Today (since
12am), Yesterday, This Week (since Monday), Last
Week (last Monday through Sunday), and Total (up to

999 Hrs. 59 Min.). By monitoring your energy
usage, you see how much the set-back periods
are saving and you can test program adjustment
to save even more. Use table on page 17.

■ To review energy usage, press to cycle through To-

day, Yesterday, This Week, Last Week, and Total.
Press again to return to normal mode, or wait 15
seconds for the display to return to normal mode.
You can also return to normal mode at any time by
pressing RETURN.

■ For example: This LCD display shows Today’s usage

to be 10 Hours, 26 minutes.

■ Press and hold for 3 seconds to reset the Energy

Monitor’s counters. The display will blink, and all
counters will be cleared to zero.

NOTE:

Clearing the Energy Monitor counter will also clear the Filter Monitor counter, as Filter

usage and Total Energy usage are the same. Also, clearing the Filter Monitor counter will
clear ALL Energy Monitor counters as well.

41659_model47350A_web.pmd

Filter Monitor

Your thermostat also keeps a record of the number of hours your filter has been in use. To maximize your system’s
performance and energy efficiency, change or clean your filter regularly.

■ When the total system run time for heat and cool

reaches 400 hours, FILTER will flash on the LCD
display to remind you to clean or change your
system’s filter. FILTER will continue to flash until
the counter is set back to zero.

■ Press to review total filter usage. The display will

blink FILTER ,then show the Filter Monitor counter.
After 15 seconds, the display will return to normal
mode, or you can hit RETURN to exit immediately.
The Filter Monitor will display up to 999 hours and
59 minutes of usage.

In this example, the counter is at 410 Hours,
26 minutes.

■ To reset the Filter Monitor counter, depress FILTER

for 3 seconds. The display will blink, and the counter
will be reset to zero.

NOTE:

Clearing the Filter Monitor counter will also clear ALL Energy Monitor counters, as Filter

usage and Total Energy usage are the same. Also, clearing the Energy Monitor counters will
clear the Filter Monitor counter as well.

TEMP

COOL

FILTER

Min

FILTER

filter