HP ProLiant DL165 - Manual (Page 29)

HP 160GB 1.5G SATA
7.2K NHP 3.5" ETY HDD
458947-B21 160-GB 7.2K Capacity 160,041 MB
Height 1.028 in (2.61 cm)
Width 4.0 in (10.16 cm)
Depth 5.787 in (147.0 mm)
Interface Serial ATA
Transfer Rate
Synchronous
(Maximum) 1.5Gb/s
Native Command
Queuing N/A
Seek Time
(typical reads, including
settling) Single Track 2.0 ms
Average <11 ms
Full-Stroke 23.0 ms
Rotational Speed 7,200 rpm
Physical Configuration Bytes/Sector 512
Logical Blocks 312,581,808
Operating Temperature41° to 131° F (5° to 55° C)
Embedded SATA
Controller Drives Supported Up to 4 SATA devices
Channels 4 1.5Gb SATA
Storage Capacity 2.0TB internal storage
Data Transfer Method 32-bit/33-MHz PCI bus-master
Maximum SATA
Channel Transfer Rate 1.5Gb/s per channel
Maximum Transfer
Rate per PCI Bus (peak) 266 MB/s per channel
Protocols SATA
PIO Mode[0-4]
Cable SATA
Internal ATA
Connectors Four SATA connectors
HP 8 Internal Port SAS
HBA with RAID Drives Supported Up to 4 SATA/SAS drives
Channels 4
Storage Capacity 1.2TB SAS, 4.0TB SATA
Data Transfer Method PCI-Express
Maximum SAS Channel
Transfer Rate 3Gb/s per channel
Maximum SAS transfer
rate 300Mb/sec per port
Protocols Supported SSP, STP, SMP
Internal Connectors 1 SAS
QuickSpecs
HP ProLiant DL165 Generation 5
Technical Specifications
DA - 13015 Worldwide QuickSpecs — Version 5 — 5.23.2008 Page 29