beautypg.com

Quickspecs, Step 1: base configuration – HP ProLiant DL165 User Manual

Page 11

background image

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must
start with a CTO Chassis.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: FIO indicates that this option is only available as a Factory Installable Option.

Step 1: Base Configuration

Non-Hot Plug Model

HP ProLiant DL165 G5 Non- Hot Plug SATA Rack Chassis

445147-B21

Factory Integrated Model ships with:

Embedded NC7782 dual-port gigabit server adapter

Two available PCI-Express slots, including one full-length/full height and one
low-profile/half height slot

HP embedded SATA controller

650 Watt Power Supply

6 Fixed, Non-Redundant Fans

Rack (1U), (1.75 in / 4.45 cm)
Fixed Mounting Rails

Hot Plug Model

HP ProLiant DL165 G5 Hot Plug SATA/SAS Rack Chassis

445148-B21

Factory Integrated Model ships with:

Embedded NC7782 dual-port gigabit server adapter

One full-length/full height PCI-Express slot. Low-profile/half height slot houses
the SATA/SAS storage controller

HP SC40Ge SAS HBA with RAID 0,1

650 Watt Power Supply

6 Fixed, Non-Redundant Fans

Rack (1U), (1.75 in / 4.45 cm)
Fixed Mounting Rails

Step 2: Choose Required Options (only one of the following from each list unless
otherwise noted)

Processors

AMD Opteron™ processor model 2356 (2.3 GHz,75W ACP), Option Kit, FIO

NOTE: If 2 processors are desired, select one 445981-L21 and one 445981-
B21.

445981-L21

AMD Opteron™ processor model 2354 (2.2 GHz, 75W ACP), Option Kit, FIO

NOTE: If 2 processors are desired, select one 445974-L21 and one 445974-
B21.

445974-L21

AMD Opteron™ processor model 2352 (2.1 GHz, 75W ACP), Option Kit, FIO

NOTE: If 2 processors are desired, select one 445971-L21 and one 445971-
B21.

445971-L21

AMD Opteron™ processor model 2346HE (1.8 GHz, 55W ACP), Option Kit, FIO

NOTE: If 2 processors are desired, select one 464210-L21 and one 464210-
B21.

464210-L21

QuickSpecs

HP ProLiant DL165 Generation 5

Configuration Information - Factory Integrated Models

DA - 13015 Worldwide QuickSpecs — Version 5 — 5.23.2008

Page 11