Assembling cleaner, Carton contents connect hose, wands and nozzle – Hoover S3670 User Manual

Page 3

Unpack cleaner from carton and iden-

tify the parts shown. Remove and

dispose of cardboard packing.

A. Canister cleaner with tools

B. WindTunnel™ powered nozzle

C. Extra paper bag (one bag is

installed in cleaner)

D. Telescopic wand and hose

E. Powered Hand Tool

F. Hard Floor Tool

1-1

1. Assembling cleaner

This cleaner was inspected and packaged carefully before being shipped from the

factory. If you should happen to need assistance during assembly or operation, call
1-800-944-9200 for an automated referral of authorized service

outlet locations (U.S. only) OR
1-800-263-6376 to speak with a representative in our Consumer Response

Center Mon-Fri 8AM-7PM EST. OR
Visit us online at www.hoover.com to find the service outlet nearest you

(click on the “Service” button).

Carton contents

Connect hose, wands and nozzle

1-2

Connect hose

With hose toward rear of cleaner, push hose

connector into opening in bag lid.
Note: The flexible hose contains

electrical wires for connection to the

power nozzle and should not be used

if damaged. The wires should not be

seen through the outer skin.

Attach nozzle and wand

The wand with the storage clip connects to

the power nozzle.
Attach it to power nozzle by fitting button pro-

jection (B) on wand into nozzle connector (C)

opening. Be sure nozzle is locked in place.
To release, press down on wand release

pedal (D) and remove wand.

To attach the hose to the telescopic wand,

Push the hand grip (G) down onto wand so

that the locking latch of the release button (F)

locks the hand grip into place.

Continued ➟

1-3

1-4