V ~ a – Harbor Freight Tools CENTRAL MACHINERY 93380 User Manual
Page 11
SKU 93380
For technical questions, please call 1-800-444-3353.
Page 11
5.
If you are using an extension cord outdoors, make sure it is marked with the
suffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use.
6.
Make sure your extension cord is properly wired and in good electrical condition.
Always replace a damaged extension cord or have it repaired by a qualified
electrician before using it.
7.
Protect your extension cords from sharp objects, excessive heat, and damp or
wet areas.
Recommended Minimum Wire Gauge For Extension Cords*
(220 Volt)
* Based on limiting the line voltage drop
to five volts at 150% of the rated amperes.
FIGURE B
SYMBOLOGY
FIGURE C
V ~
A
xxxx/min.
no
Double Insulated
Canadian Standards
Association
Underwriters
Laboratories, Inc.
Volts Alternating Current
Amperes
No Load Revolutions
per Minute (RPM)
- 32206 (28 pages)
- 93012 (16 pages)
- 47613 (16 pages)
- 68298 (14 pages)
- 47003 (18 pages)
- 41345 (4 pages)
- 12" Compound Slide Miter Saw 91852 (27 pages)
- 92772 (16 pages)
- 46813 (37 pages)
- 94443 (14 pages)
- 93827 (15 pages)
- 37412 (9 pages)
- 98199 (20 pages)
- 93762 (33 pages)
- Drill Master 3733 (20 pages)
- 46225 (12 pages)
- METAL CUTTING BANDSAW 93762 (29 pages)
- 42654 (18 pages)
- 92386 (25 pages)
- Chicago Electric 4" Table Saw with 2 Blades 93211 (8 pages)
- 113 (8 pages)
- Drillmaster 6" Cut-Off Saw 69438 (16 pages)
- 41146 (1 page)
- 03733 (12 pages)
- 42307 (12 pages)
- 40315 (18 pages)
- Drillmaster 18v Cordless Reciprocating Saw 68240 (12 pages)
- 41453 (11 pages)
- 91852 (26 pages)
- 12" CERAMIC TILE CUTTER 68978 (4 pages)
- 42933 (19 pages)
- 47840 (11 pages)
- 41711 (8 pages)
- 46055 (13 pages)
- Metal Cutting Bandsaw 97099 (46 pages)
- 98089 (26 pages)
- Chicago 91938 (16 pages)
- Chicago 94560 (16 pages)
- 44829 (8 pages)
- 01624 (12 pages)
- 42818 (15 pages)
- 98194 (24 pages)
- Model 97007 (15 pages)
- Model 94245 (18 pages)