Hitachi HV-D25 - Manual (Page 63)

(19) CCD drive functions
Preset 1/100 (1/60 PAL), 1/250, 1/500, 1/1,000,
1/2,000, 1/4,000, 1/10,000 second
Lockscan NTSC: 1/60.38 to 1/251.5 second (1 H steps)
PAL : 1/50.31 to 1/253.8 second (1 H steps)
AES Off to approx. 1/1,000 second
(up to equivalent of 4 F stops, continuously variable in 1 H steps)
Long integration Selectable field/frame integration
NTSC: 1/30 to approx. 8 seconds (1 frame steps)
PAL : 1/25 to approx. 8 seconds (1 frame steps)
(External picture memory required for continuous picture.)
Frame readout (Image lag response deteriorates)
(20) Color bar NTSC: SMPTE
PAL : Full
(21) Power supply voltage 12 V rated
Use a DC power supply with risetime after power on of less than 0.5 second.
Stable operation is ensured with DC power supply of 10.5 to 17 V.
No ripple and noise shall occur.
(22) Power consumption Approx. 8.2 W (camera head only)
Current for lens is less than 300 mA.
(23) Dimensions 80 (W) × 85 (H) × 138 (D) mm
(24) Mass Approx. 950 g (excluding lens)
(25) Ambient temperature (operating) -10°C to 45 °C
(26) Ambient temperature (storage) -20°C to 60°C
(27) Humidity (Operating) 40 to 90%
(28) Humidity (Storage) 30 to 90%