Hitachi HV-D25 - Manual (Page 55)

42
Set button
When pressed, control data are stored and the LED lights for about 1 second.
l Notes:
1 Be sure to press the Set button in order to save the setting data before switching off
power. Otherwise the data are lost and old data are returned at power on. Also, the old data are deleted
by pressing the Set button.
2 The Set button operation differs between the RC-C10 and RC-C10(R1). The RC-C10 stores the
panel adjustment and operation data. In addition, the RC-C10 (R1) stores the menu mode data, while
these are also stored by the HV-D15 camera.
Remote status LED
Remote switch
• On (LED red) :The RC-C10 can be operated for normal camera control.
• Lock (LED green) :RC-C10 functions are inhibited, but control data are sent to the camera.
•
Off (LED green) :Control data are not sent from RC-C10 and control is from the camera operation itself.
M. BLK control
Master black control
Iris control
Adjusts the lens iris.
LENS TYPE:DC
• Auto :Over-ride adjustable (about 2 f-stops)
• Remote :Adjustable from fully closed to fully open
• Manual :Iris cannot be adjusted from the RC-C10.
•
AGC and AES operation over-ride can be adjusted.
LENS TYPE:VIDEO
•
Auto :Over-ride adjustable (about 2 f-stops)
• Remote :Iris cannot be adjusted from the RC-C10.
• Manual:Over-ride adjustable (about 2 f-stops)
LED indicators
Light according to selected mode.
DTL button
ets the camera detail amount. Settings are Off, Low, Normal and High. Ordinarily set to Normal.
Iris button
Selects the lens iris mode. Selectable modes are Auto, Remote and Manual.
Refer to the RC-C10 Operation Manual for adjustment and operation.
11
12
13
12
12
12
14
15
16
17
18