HP MT1075 - Manual (Page 64)

E-60
SPECIFICATIONS
This section provides technical information about the MT1075 Projector's performance
Model Number MT1075
Optical
LCD Panel 1.0" p-Si TFT active-matrix with Micro Lens Array
Resolution 1024 ן768 pixels up to UXGA with Advanced AccuBlend
Lens Motorized zoom and focus:
F1.74 – 2.18 f=30.8mm – 41.6mm
Lamp 300 W DC standard / 160 W DC (Optional Extended life lamp)
Color Image Sensor 23,040 pixels (160 dots ן144 lines)
Image Size 25 inches – 500 inches (0.6 m – 12.7 m) diagonal
Projection Distance 2.96 ft – 51.23 ft / 1.0 m (Tele) – 15.6 m (Wide)
Projection Angle Tele : 10.3° – 10.7° Wide : 13.7° – 14.4°
Electrical
Inputs 2 RGB (D-Sub 15 Pin/BNC ן5), 1 DVI, 1 S-Video, 1 Video, 2 PC Card,
3 Stereo Mini Audio, 2 (L/R) RCA Audio, 1 PC Control, 1 (L/R) RCA Audio
Outputs 1 RGB, 1 Stereo Mini Audio
USB Port 1 A Type, 1 B Type
Video Compatibility NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM, HDTV:1080p, 1080i, 720p, 576p, 576i, 480p, 480i
(w/optional cable)
Scan Rate Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over) / Vertical: 48 Hz to 120 Hz
Video Bandwidth RGB: 80 MHz (-3dB)
Color Reproduction 16.7 million colors simultaneously, Full color
Horizontal Resolution NTSC / NTSC4.43/PAL/PAL-M/PAL-N/PAL60: 600 TV lines
SECAM: 350 TV lines
RGB: 1024 dots (H) ן768 dots (V),
External Control RS232, IR, USB, LAN (optional)
Sync Compatibility Separate Sync / Composite Sync / Sync on G
Built-in Speakers 5W ן2 (stereo)
Power Requirement 100 - 240V AC, 50 / 60 Hz
Input Current 4.3A
Power Consumption 1.0W in Standby mode/14W in Idle mode/415W in Lamp Normal mode/345W in Lamp Eco mode
(250W in use of the optional Extended Life lamp)
Mechanical
Installation Orientation: Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear
Dimensions 13.2" (W) ן4.5" (H)ן12.7" (D)
334mm (W) ן115mm (H)ן323mm (D)
(not including protrusions)
Net Weight 13.0 lbs / 5.9 kg
Environmental Considerations
Operational Temperatures : 32° to 95°F (0° to 35°C), 20% to 80% humidity (non-condensing)
Storage Temperatures : 14° to 122°F (-10° to 50°C), 20% to 80% humidity (non-condensing)
Regulations UL/C-UL Approved (UL 60950, CSA 60950)
Meets DOC Canada Class B requirements
Meets FCC Class B requirements
Meets AS/NZS CISPR22 Class B
Meets EMC Directive (EN55022, EN55024, EN61000-3-2, EN61000-3-3)
Meets Low Voltage Directive (EN60950, TUV GS Approved)
For additional information visit:
US : http://www.necvisualsystems.com
Europe : http://www.neceurope.com/
Global : http://www.nec-pj.com/
LCD panels are inherently susceptible to pixel defects.
For additional information regarding pixel data, please contact your local NEC sales office.
The specifications are subject to change without notice.