HP Q5693A - Manual (Page 24)

16 2 Configuring the MBM for your work environment ENWW
Windows NT 4.0
1 Open a document, and then click Print on the File menu.
2 Click Setup or Properties. (The options might be different for your program.)
3 Perform one of the following actions:
If you are using a PCL printer driver
• On the Output tab, select the appropriate output bin, and then click OK.
If you are using a PS printer driver
• Click the Advanced tab. Under Document Options, click Printer Features. Select the
appropriate output bin from the Output Bin list.
Macintosh
1 On the File menu, click Print.
2 Select the Finishing panel.
3 In the Output Destination list, select 8-Bin Mailbox.
4 In the Mailbox Options list, select the appropriate output bin, and then click Print.
Sending a copy job to an output bin that is different from the default
HP LaserJet 9040mfp/9050mfp/9500mfp
1 Touch the copy icon on the control-panel display.
2 Touch COPY SETTINGS , and then touch the Advanced tab.
3 Select the output bin for your copy job.
The output bin options that are available for copy jobs differ depending on the operation mode.
See the following table for more information.
Operational mode Copy bin is enabled Copy bin is disabled
Mailbox mode ● UPPER BIN
● *BIN 1
● BIN 2
● BIN 3
● BIN 4
● BIN 5
● BIN 6
● BIN 7
● BIN 8
Not applicable (the
face-down bin 1 is always
used for copy jobs when the
Mailbox mode is set)
● Stacker mode
● Job Separator mode
● Sorter/Collator mode
● UPPER BIN (STRAIGHT
PATH)
● *BIN 1
● BINS 2-8 (CORRECT
ORDER)
● UPPER BIN (STRAIGHT
PATH)
● *BINs 1-8 (CORRECT
ORDER)