HP 3COM ETHERLINK III 3C900-B - Manual (Page 10)

8
Connecting to a Novell NetWare 5.0 Server
Microsoft Windows NT 4.0 Workstation
13 At the “Network Services:” prompt, accept the default settings and click
on “Next”.
14 Complete the network card installation by clicking on “Next”.
15 Type in the path to your Windows NT files and click “Continue”.
16 If TCPIP was one of the protocols selected, you will be prompted for some
TCPIP information. Your Network Administrator can provide you with
this information.
17 Accept the default entries at the “Show Bindings for:” windows and click
on “Next”.
18 When “Windows NT is now ready to start the network…” window appears,
click on “Next”.
19 Specify your Computer Name, Workgroup or Domain Name and click
inexact”.
20 Click on “Finish” when the “Network has been installed on this computer”
message appears.
21 Remove the driver disk and select “Yes” when prompted to restart your
computer.
22 Log onto Windows NT Workstation with administrator privileges.
23 From the location of the “Novell Client v4.6 for Windows NT” installation
files, execute “Winsetup.exe”.
24 Select the Language of Installation and click on it.
25 Click on “Windows NT Client”.
26 Select either “Typical” or “Custom” and click on “Install”. Typical
Installation is normally chosen. Select Custom Installation only if you are
an administrator or an advanced user. When prompted for options during
installation, ask your Network Administrator for more information.
27 Click on “Yes” to agree with the Novell Terms and Conditions to proceed
with the installation.
28 Click on “Yes” to replace the previous GINA (Graphical Identification and
Authentication) authenticator with the Novell Client for Windows NT
GINA authenticator.
29 Click on “Reboot” to restart the system once the installation is complete.
30 Log onto Windows NT Workstation with administrator privileges and re-
install the current service pack.