Hitachi Koki USA CMP4120HDUS - Manual (Page 29)

ENGLISH
20
OTHER FEATURES
• The previously recorded items will be lost.
• The signal mode can be identified by the horizontal/vertical sync frequency and the sync
signal polarity. Different signals with which all the elements are the same or similar will be
handled as the same signal.
• RGB1 and RGB2 inputs have common elements that can be recorded for each signal mode.
Because of this, when the contents are recorded with RGB1 (or RGB2), there may be loss
of adjustment during RGB2 (or RGB1) reception in the same signal mode.
■ Approximately 1 sec. after adjustment is completed, the adjustments will be
recorded as shown in the table below.
Automatic Store
Item Display
Registration
condition
Reproduction
condition
Sound volume
Sound balance
Treble
Bass
Mute volume
Input status automatic
display
Line correction
Three-dimensional Y/C
separation
HD signal
Language selection
VOLUME
BALANCE
TREBLE
BASS
MUTE LEVEL
AUTO FREQ.
LINE INTP.
3D COMB
COMPONENT
LANGUAGE
One set can be recorded.
During normal signal
reception.
Contrast
Brightness
Color temperature
Gamma correction
Input signal level CONTRAST
BRIGHTNESS
COLOR SELECT
GAMMA
VIDEO LEVEL
One set can be recorded
during common RGB1,
RGB2 input; one set of
two can be recorded
during normal signal
reception with common
VIDEO 1, VIDEO 2 input.
During normal signal
reception.
Color
Tint
Sharpness COLOR
TINT
SHARPNESS One set can be recorded
during common VIDEO 1,
VIDEO 2 input.
During normal signal
reception.
Display area
Display size
Horizonal position
Vertical position
Dot clock frequency
Dot clock phase
Verical size DISPLAY AREA
DISPLAY SIZE
H.POSITION
V.POSITION
CLOCK
PHASE
V. SIZE
One group can be
recorded for each signal
mode. During recording and when
the same signal mode is
detected.