Hitachi Koki USA CMP4120HDUS - Manual (Page 20)

■ Press the remote controller RECALL button to
display the status of input signals on the screen.
■ Press the remote controller RECALL button
once again to exit the screen display.
• The EasyMenu will clear 5 seconds later.
■ While the on-screen display system, EasyMenu , is not on display, press the
remote controller SELECT button or to adjust the contrast.
• When you press these buttons, the status of
contrast adjustment and the input horizontal
(H) and vertical (V) frequencies of the input
signal will be displayed in a guidance image.
• While the guidance is on display, press the
key to narrow the difference between darkness
and brightness.
• While the guidance is on display, press the
key to widen the difference between darkness
and brightness.
• You can also adjust the contrast setting via the
on-screen display system, EasyMenu
.
• The contrast adjustment mode will exit when
no keys are entered for 5 seconds. (The
adjustment status guidance will disappear
automatically.)
ENGLISH
11
SELECT
Remote
controller
CONTRAST : 100
H : ** . * kHz, V : ** . * Hz
Input horizontal
frequency Input vertical
frequency
Adjustment status guidance
Contrast Adjustment
12
13
Input Signal Status Display
RGB1 [D-SUB]
H : 46.5kHz, V : 60.0Hz
Input horizontal
frequency Input vertical
frequency
CONTRAST : 100
Contrast setting
VIDEO
RGB
RECALL
Remote
controller
VIDEO2 [COMPONENT]
Input terminal name
VIDEO
RGB