Hasselblad 848 - Manual (Page 4)

Introduction
The Batch Feeder enables you to load up to 10 original holders (up to 60
originals, depending on format) for batch scanning with your Flextight
848 or 949 Scanner.
This manual provides important information about using the Batch
Feeder for your Flextight 848 or 949 scanner.
Topics include:
Important warnings and restrictions
System requirements
Installation instructions
Operating instructions
Instructions for preparing the unit for transportation
Disposal instructions
Important Warnings and Restrictions
General
Read all of the included documentation before attempting to install
and use the Batch Feeder.
Never attach or detach the Feeder when the scanner is switched on.
Always use the standard, software-guided procedure when mounting
or unmounting the Feeder from your scanner. See “Mounting and
Unmounting the Batch Feeder” on page 8 for details.
Keep the original box in which the Feeder was delivered to you. This
box is made of sturdy cardboard and includes a foam lining custom
cut to hold the Feeder safely and securely. Always store the Feeder in
this box when you are not using it.
Before shipping the Feeder, always refit the two transportation safety
screws and pack it in its original box. If you must return the Feeder to
Hasselblad for service, you must use this box for shipping or the ship-
ment will be refused. See “Preparing the Feeder for Storage or Ship-
ping” on page 31 for instructions.
•
•
•
•
•
•
•
•
•
•
•