Hasselblad 848 User Manual
Page 29
The scanner now shuts down and the
Align Feeder
window updates
with new instructions.
Remove the Feeder and use the adjustment tool to re-tighten the self-
locking nut on the rear of the Feeder (see also Figure 8, above).
Re-mount the Feeder on your scanner and then turn on the scanner.
When the scanner comes online, click on
Continue
in the
Align
Feeder
window.
The
Align Feeder
window updates to tell you that the procedure is
complete.
Click on
Done
to close the
Align Feeder
window.
9.
10.
11.
12.