HP Jornada 820 - Manual (Page 48)

44
|
HP Jornada H/PC User’s Guide
ready to dial up. At this time, you will also complete the
following tasks:
Choose E-mail or Web Service—You can choose one or
both options. Your network administrator can tell you which
options are available to you.
Choose Typical or Advanced setup—Typical setup will
automate most of the connection configuration by using
default settings. Advanced setup allows you more control
over setup options. Typical and Advanced setup options are
offered at the beginning of each stage of the setup process:
Service Provider (in this case, your network administrator),
E-mail Service, and Web Service.
Input Service Provider information—This includes
information provided by your network administrator, such
as the dial-up telephone number and IP, DNS, and WINS
address settings. Many networks automatically (or, dynami-
cally) set both IP and DNS addresses. If your network does
not assign these automatically, you should clear the
Server-
assigned addresses option and type the addresses.
When you set the IP address, you can also choose to
use SLIP (Serial Line Internet Protocol) if your network
uses this protocol. PPP (Point-to-Point Protocol) is the
HP Jornada setup default protocol, but SLIP is supported as
well. If you have a SLIP account, select the
Use SLIP check
box during the IP setup portion of the HP Jornada dialup
configuration process.
You also have the option to choose software and IP header compression options. Ask your
network administrator if these options are recommended for your account.
Chapter3.P65 0109 2/4/99, 4:12 PM 44