Henny Penny FM07-020-F - Manual (Page 17)

2-6. FILTERING THE
SHORTENING
(Continued)
7. When the pump is pumping air only, close the filter valve
first and then move the main power switch to the OFF
position.
8. Being sure there is sufficient shortening in the frypot,
depress the EXIT FILL switch.
9. The unit will go into the stand-by mode and digital display
will read COOL.
10. Temperature of shortening will then stabilize to 250ºF.
11. The control will stay in the stand-by mode until the EXIT
COOL switch is depressed. This will return the control
to the last cycle selected and regulate to that cycle’s
programmed temperature.
304 2-5