High End Systems AF1000 - Manual (Page 46)

ADM-14 Mini Controller User’s Manual
Intensity Parameters
Use the following table for the descriptions of the parameters available through the
<
intensity > key.
Table ADM.16: Intensity Parameters
Rate Parameters
Use the following table for the descriptions available through the < rate > key.
Table ADM.17: Rate Parameters
Display Description
1 – 6 4 1 is the dimmest intensity and 6 4 is the brightest .
F 1 ramp down
F 2 ramp down
F 3 ramp up and down
F 4 random–changes every time a program is run
F 5 maximum Intensity for one sequence, then minimum
Intensity for the next program run
F 6 maximum Intensity for two steps, then
minimum Intensity for the next two steps
F 7 maximum intensity for one step, then minimum Intensity for
one step
F A randomly selects F 1 –F 7 and randomly uses a value of 6 4
fifty percent of the time
Display Description
1 - 9 9 1 is the slowest Rate and 9 9 is the fastest rate
F 1 ramp down
F 2 ramp up
F 3 ramp up and down
F 4 fast for two program programs, then slow for one program
F 5 fast for twelve steps, then slow for four steps
F 6 one step fast, next step slow
F 7 small pause every five steps
F A randomly selects F 1 –F 7 and randomly uses a value of 9 9
fifty percent of the time