Figure 1.3. system cabling, Figure 1.4. audio cabling – High End Systems AF1000 User Manual
Page 17
Chapter 1 Installation and Setup
1-5
1
Connect an XLR cable to the rear of the Mini Controller and run it to the first
AF1000. Daisy chain the desired number of fixtures together. Refer to Figure 1.3.
Note: fixture termination is not required.
Figure 1.3. System Cabling
If you intend on using the audio synchronization, connect a 1/4-inch mono male
(tip, ring) phone connector or 1/4-inch stereo male (tip, ring, sleeve) phone
connector to the Audio input jack on the rear of the connector. Refer to Figure 1.4
for correct cable wiring.
Figure 1.4. Audio Cabling
IN
OUT
IN
OUT
IN
OUT
AF1000
AF1000
AF1000
1
2
12
Mini
Controller