High End Systems AF1000 - Manual (Page 25)

Chapter 2 Mini Controller Operation 2-7
2
Audio Mode
The Audio feature allows audio triggering and synchronization control of the
AF1000 strobes. Press the <
audio > key and use the arrow keys to maneuver
through the audio parameters.
Note: if any of the following parameters are selected, Audio Mode will disable
itself ( - - ) so it will not to conflict with any actions of these parameters:
• Advance Programs ( A 1 through A 8 ) in Program Mode.
• Program Function in Rate Mode and Intensity Mode.
• Function Advance in Rate or Intensity Mode.
Audio Parameters
There are five sets of audio parameters. Refer to Figure 2.1 and the Addendum for
clarification of Audio parameters.
Figure 2.1. Audio Parameter Display
The audio settings are:
• Two side by side horizontal bars– the Audio Mode is disabled and Audio Rate
or Intensity functions are not available (default).
• One horizontal bar– no program advancement, but the audio rate or intensity
manipulation functions are available (refer to the following section).
• Two horizontal bars– programs will advance randomly with every four beats.
• Three horizontal bars– programs will advance randomly with every beat.
• Audio Advance ( A A )– programs will randomly advance to a different Audio
Mode every eight seconds.
Audio disabled (off)
No program
advancement
Program advancement
every four beats
Program advancement
every beat
Audio Advance
1
through
9
depicts the
manipulation of Rate of
Intensity function
0 through 9 depicts the
manipulation of Rate of
Intensity function