HP C5100 - Manual (Page 19)

– Bottom left: xD-Picture Card
– Bottom right: Memory Stick, Magic Gate Memory Stick, Memory Stick Duo
(with user-supplied adapter), Memory Stick Pro
2. Press OK to select View & Print .
When you press OK , the most recent photo on your memory card appears on the
display.
3. Press or to scroll through the photos on your memory card.
4. When the photo you want to print appears, press OK .
Tip If you want to print the photo using the default print settings, press Print
Photos . The HP All-in-One will print a 10 x 15 cm (4 x 6 inch) copy of your
photo onto the paper currently loaded in the photo tray.
5. Press OK to select 4 x 6 .
6. Press or to highlight a paper size, and then press OK .
The following options are available:
–
Print one 10 x 15 cm (4 x 6 inch) borderless photo on each sheet of 10 x 15 cm
(4 x 6 inch) photo paper
– Print up to three 10 x 15 cm (4 x 6 inch) photos with borders on a full-size sheet
of paper
When you press OK , the selected photo reappears.
7. (Optional) Press and to select additional photos to print, or press OK to display
the selection menu and change the print settings. For information on these options,
see the onscreen Help that came with the HP All-in-One.
8. When you are done changing print settings and selecting photos, press OK to
display the selection menu.
9. Press to highlight Done Selecting , and then press OK .
The Print Summary screen appears.
10. Press or to highlight one of the following options, and then press OK .
Print Options Enables you to manually specify the type of paper on which you
are printing and whether you want to print a date and time
stamp on your photo.
By default, the
Paper Type is set to Automatic and the Date
Stamp setting is set to Off . If you want, you can change the
defaults of these settings with the Set New Defaults option.
Print Preview Displays a preview of what your printed page will look like. This
enables you to verify your settings before printing and wasting
paper and ink on potential mistakes.
Print Now Prints your photos with the size and layout you selected.
Print from a software application
Most print settings are automatically handled by the software application. You need to
change the settings manually only when you change print quality, print on specific types
of paper or transparency film, or use special features.
Chapter 1
16 HP Photosmart C5100 All-in-One series
H
P
All-in-
O
ne overview