beautypg.com

Installing the printer, Software on a windows computer, Installing the printer software on a windows – HP Photosmart 8400 Series User Manual

Page 78: Computer

background image

After you finish connecting the printer to the network, install the printer software. You cannot print
from a computer until you do the software installation.

Installing the printer software on a Windows computer

Installing the printer software on a Macintosh

Installing the printer software on a Windows computer

Note

Set up the printer as indicated in the setup instructions that came in the box.

Installation time can range from 20 minutes (Windows XP) to 1 hour (Windows 98), the amount
of available hard drive space, and the processor speed of the computer. Make sure you have
already connected the printer to the network with an ethernet cable before you begin the
installation.

Note

The printer software must be installed as described in this section on every

networked computer from which you want to print to the Photosmart 8400 series printer.
After the installation, printing is identical to printing through a USB connection.

Tip

Do not use the Windows Add Printer control panel utility to install the printer

software. You must use the HP installer to install the printer on a network properly.

To install the printer software
1.

Print a network configuration page. You may need the information included in this report if
the installer cannot detect the printer.
See

Printing a network configuration page

.

2.

Insert the HP Photosmart printer software CD into the computer's CD-ROM drive.

3.

Click Next and follow the instructions provided by the Installer to check and prepare the
system, and install drivers, plug-ins, and software. This takes several minutes.

4.

At the Connection Type screen, select Through the network, then click Next.
The Searching screen appears as the Setup program searches for the printer on the
network.
If the Printer Found screen appears, do this:
a.

Verify that the printer description is correct. (Use the configuration page to verify the
printer name and hardware address. See

Printing a network configuration page

.)

b.

If the printer description is correct, select Yes, install this printer, then click Next.
If more than one printer is found on the network, select HP Photosmart 8400 series
as the device to configure and install, then click Next. If you have more than one
HP Photosmart 8400 series printer on your network, use the Hardware Address (MAC)

Appendix a

74

HP Photosmart 8400 series

This manual is related to the following products: