HTC LZC5227 / 965879701 - Manual (Page 32)

OPERATION
32 - Husqvarna
IMPORTANT INFORMATION
The mower deck’s gauge wheels should be
evenly adjusted.
8011-561
Select the cutting height
Running
Release the parking brake by moving the lever 1.
downward.
Your mower is equipped with an operator
presence system. When the engine is running,
any attempt by the operator to leave the seat
without first setting the parking brake will shut
off the engine.
Move the steering controls to the neutral
2.
position (N).
8011-511-1
Released parking brake
Select the cutting height by placing the peg in 3.
the corresponding hole for desired height. Lock
the peg in place on the inside with the pin.
Squeeze the lock handle up to the lifting lever
4.
while moving the lever forward to meet the set
peg.
Make sure the work area is free from objects
5.
that could be thrown by the rotating blades.
8011-510
Engaging the mower deck
Engage the mower deck by pulling out the 6.
blade switch.
Move throttle control to full throttle.
7.
The machine’s speed and direction are 8.
continuously variable using the two steering
controls. When both controls are in the neutral
position, the machine stands still.
By moving both controls an equal amount
forward or backward, the machine moves in a
straight line forward or backward respectively.
WARNING!
Ensure that no one is near mower
when engaging blade switch.