HTC LZC5227 / 965879701 - Manual (Page 21)

CONTROLS
Husqvarna - 21
Fuses
The fuses are located in a holder to the left of the
hydraulic tank. They are flat pin fuses of the same type
used in automobiles.
There are three fuses as well as a socket for one
spare fuse.
Fuse ratings and functions:
20 A, Primary fuse. •
7.5 A, Mower deck coupling. •
7.5 A, Accessory outlet. •
Socket for spare fuse. •
8011-746
Fuses
Blade switch
To engage the mower deck, pull the blade switch knob
out. The mower blades are disengaged when the knob
is pressed down fully.
8011-510
Blade Switch
Ignition Switch
The ignition key is placed on the control panel and is
used to start and stop the engine.
8011-748
Ignition Switch
WARNING!
Do not run the starter for more than
five seconds each time. If the engine
does not start, wait 10 seconds
before retrying.