HP KSC-570 - Manual (Page 40)

35 DIGITAL SATELLITE RECEIVER
Menu Guide
5. Screen Type
If you have a TV set with the 4:3 picture format and the
transmission is in 16:9, you can select 4:3 letterbox,
4:3 full screen and 16:9 full screen.
1. Select the aspect ratio of TV which is connected to STB and then
press OK( ) button.
Note 1: Fullscreen will fill up the screen but cut off some information on
the left and right sides.
2: Letterbox will give a complete picture, but leave black areas at the top
and bottom.
3: For easy selection of Screen Type, press the P.SIZE button on your
remote control.
6. Banner Time
When you switch channels, an information banner will be
shown for a few seconds.
You can select for how long the banner will be shown.
1. Select the banner time you want and then press OK( ) button.
2. Each selectable time items has meaning of the interval time during a channel
banner stays on changed channel screens.
The time ranges 1, 3, 6, 9 12 and 15 seconds.
7. RF Mode (option)
You can select the RF Mode. If you get picture but no sound,
the RF Mode selecting might be wrong.
Select an RF Mode and then press OK ( ) button.
RF Mode : PAL BG, PAL I, PAL DK, SECAM L, NTSC M
OK
OK
OK
System Setting
k1.5 500 SAT(Eng) 1/5/06 5:53 PM ˘ ` 35 mac-4 HP LaserJet 5100 Series T