HP KSC-570 - Manual (Page 13)

8 DIGITAL SATELLITE RECEIVER
Connecting Your Equipment
4. Connect STB to a Digital Audio System
If you have a DAC with S/PDIF coaxial cable input, you can connect the STB with it to enjoy
higher quality sound. Connect S/PDIF coaxial cable to a digital amplifier.
5. Loop Through
If you have another analogue or digital STB and you wish to use the same LNB then you can
connect it via the loop through. Connect one end of the coaxial cable to the Loop Through on the
STB and connect the other end to the LNB IN on your second STB.
CAM (Conditional Access Module) and Smart Card
CAUTION
Please do not plug in the main power supply cord
until you have finished all of the connections!
If you want to enjoy watching scrambled
broadcasting channels, you need to purchase
the CAMs and smart cards from a service provider’s
sales department.
However, broadcasting channels from multiple
service providers call for multiple CAMs and
Smart cards.
STB which who have only the CAMs and smart
cards provided by the one service provider can
show several broadcasting channels of the provider.
Please refer to manuals provided by service
providers for details because the CAM and smart
cards are featured with unique menus, apart from menus given by STB.
Watching "Free-To-Air" channel is available regardless of the CAM and smart cards.
As service providers download new information to smart cards if necessary,
those who have CAMs and smart cards should always put the smart cards in proper slots.
k1.5 500 SAT(Eng) 1/5/06 5:52 PM ˘ ` 8 mac-4 HP LaserJet 5100 Series T