beautypg.com

Menu guide, Channel search – HP KSC-570 User Manual

Page 29

background image

24

DIGITAL SATELLITE RECEIVER

Menu Guide

6. 22KHz

: Depending on the user’s antenna switch box or LNB.

You can supply either 22KHz by setting “ON” or not

by setting ”OFF”.

When selecting the U-LNB 1 and U-LNB 2,

the 22KHz will be dimmed.

7. 0V/12V

: Depending on the user’s antenna switch box.

You can choose either 0V/12V.

8. Tone Burst

: Depending on the user’s antenna switch box.

(“off”, “SAT A” or “SAT B”)

9. Press the BLUE button to set Drive(Fine Drive or Normal Drive) to run the motor.

- Fine Drive/Normal Drive : To move the motor, press LEFT/RIGHT( / ) button.

- Go to zero : To move the zero position, press OK(

) button.

- Store to location : To store the current position, press OK(

) button.

- East Limit : To set the east limit by current position, press OK(

) button.

- West Limit : To set the west limit by current position, press OK(

) button.

- Clear Limit : To clear the stored limit value, press OK(

) button.

After selecting all that is necessary, press RED button to scan the satellite list.

Pop up widow will be displayed.

Select ON or OFF according to your Network.

Select All or FTA Search Type.

Press OK(

) button and searching will start.

OK

OK

OK

OK

OK

OK

Channel Search

k1.5 500 SAT(Eng) 1/5/06 5:53 PM ˘

` 24 mac-4 HP LaserJet 5100 Series T