HP KSC-570 - Manual (Page 20)

15 DIGITAL SATELLITE RECEIVER
Basic Operation
9. Simple Channel List
1. When you press OK( ) button during receiving service stream,
you can get “Channel List” view.
2. Using UP/DOWN( ) buttons in “Channel List” view, you can choose
another channel.
3. After moving highlight on a channel, then press OK( ) button.
4. Press RED button to change channel listing.
5. To get the channel sort list, press the GREEN button.
Pop up window will be displayed on the screen.
6. Select the sort list you want with UP/DOWN( ) buttons and then press
OK( ) button to get it.
10. Soundtrack
1. When you want to change the Audio Language of current channel,
press the A.LANG button on the remote control.
The on-screen menu is displayed on the left side of the screen.
2. Use UP/DOWN( ) buttons to choose the audio you want.
3. To cancel or exit, press the A.LANG button again.
You can change a default audio language in the system setting menu
mode.
11. To change the audio output
1. Press the A.L/R button on the remote control unit to change
the output.
2. Then on-screen menu is displayed on the top right side of the screen.
3. Press the A.L/R button repeatedly to change the sound mode.
(Mono, Left, Right, Stereo)
OK
OK
OK
Basic Function
k1.5 500 SAT(Eng) 1/5/06 5:53 PM ˘ ` 15 mac-4 HP LaserJet 5100 Series T