Menu guide, Channel search – HP KSC-570 User Manual
Page 31
26
DIGITAL SATELLITE RECEIVER
Menu Guide
- Scan
Press the RED button on the TP list.
Pop up window will be displayed on the screen.
♦ Frequency :
Input a proper Frequency using NUMERIC buttons.
♦ Symbol Rate : Input a proper Symbol Rate using NUMERIC buttons.
♦ Polarity :
Use the LEFT/RIGHT(
/
) buttons to select the
Polarisation of the transponder.(Horizontal, Vertical)
♦ FEC :
Use the LEFT/RIGHT(
/
) buttons to select the FEC
of the transponder.
♦ You can select the value of Auto, 1/2, 2/3, 3/4, 5/6, and 7/8.
♦ Network :
You can select Yes or No. When you select ‘Yes’ ,
you can find more transponders using the home network.
♦ Video PID/Audio PID/PCR PID :
You can set PID to search for services.
Use the LEFT/RIGHT(
/
) buttons or NUMERIC buttons
to input the value.
Press OK(
) button to start Scanning.
3. Degree :
Press the NUMERIC buttons and enter te degree.
4. LNB Freq. :
Select the proper LNB frequency referring to your
LNB using OK(
) and UP/DOWN(
) buttons.
5. LNB Power :
Select the LNB Power On or OFF.
6. 22KHz:
Depending on the user’s antenna switch box or LNB.
You can supply either 22KHz by setting “ON” or not
by setting ”OFF”.
When selecting the U-LNB 1 and U-LNB 2,
the 22KHz will be dimmed.
OK
OK
Channel Search
k1.5 500 SAT(Eng) 1/5/06 5:53 PM ˘
` 26 mac-4 HP LaserJet 5100 Series T