Figure 3-26, Port numbers setup screen – Honeywell HRXD9 User Manual

Page 54

Text mode
Original mode

Configuration

Figure 3-26

Port Numbers Setup Screen

Change the numbers by highlighting them and using the Up and Down arrow
buttons to increase or decrease the number.

The factory default Port settings are:

Remote Admin:

8200

Remote Callback:

8201

Remote Watch:

8016

Remote Search:

10019

Note

The system restarts automatically after changing the port
settings.

Note

Do NOT use the same port number for two different programs,
otherwise, the DVR cannot be connected with the PC running
RAS or WebGuard.

Caution

When changing the port settings, you must change the port
settings on the PC running RAS or WebGuard as well. Refer to the

RAS Plus User Manual

for details.

Selecting DHCP from the Type and highlighting Save reads the current IP
address of the DVR configured by DHCP (Dynamic Host Configuration Protocol)
network.