HP MODULAR SMART ARRAY 2000 SA G2 - Manual (Page 6)

MSA2000sa G2 MSA2000fc G2 MSA2000i G2
Capacity (raw)
Minimum / with
maximum additional
drive enclosures LFF: 5.4 TB SAS
or 12 TB SATA
w/ 4 drive enclosures:
27 TB SAS
or 60 TB SATA
LFF: 5.4 TB SAS
or 12 TB SATA
w/ 4 drive enclosures:
27 TB SAS
or 60 TB SATA
LFF: 5.4 TB SAS
or 12 TB SATA
w/ 4 drive enclosures:
27 TB SAS
or 60 TB SATA
SFF: 7.2 TB SAS
or 6.0 TB SATA
w/ 3 MSA70 JBODs:
29.7 TB SAS
or 24.7 TB SATA
SFF: 7.2 TB SAS
or 6.0 TB SATA
w/ 3 MSA70 JBODs:
29.7 TB SAS
or 24.7 TB SATA
SFF: 7.2 TB SAS
or 6.0 TB SATA
w/ 3 MSA70 JBODs:
29.7 TB SAS
or 24.7 TB SATA
Controller Cache 1 GB per controller 1 GB per controller 1 GB per controller
Total LUNs 511 512 512
Host connect
MSA2000 has 1 or 2
controllers, EVA has 2
controllers standard Four 3Gb
SAS ports
per controller
Two 4Gb
Fibre Channel ports
per controller
Two 1GbE
iSCSI ports
per controller
Maximum Drives
w/ expansion 60 LFF/99 SFF 60 LFF/99 SFF 60 LFF/99 SFF
Maximum host
supported 64 ** 64 32
Snapshot, remote
replication Snapshot, clone Snapshot, clone Snapshot, clone
Use for Storage Primary Storage with SAS
Secondary with SATA
Primary Storage with SAS
Secondary with SATA
Primary Storage with SAS
Secondary with SATA
*maximum available storage capacity depends on the RAID level being implemented, and is based on maximum number
of LUNs and LUN size
** Supports up to 8 hosts with SAS direct connect and 64 hosts (BladeSystem servers) using 3Gb SAS BL switch
Product Technology SAS Four 3Gb host ports per controller
Modular Chassis 2U rack height. 12 Large Form Factor or 24 Small Form Factor drive
bays, accommodating SAS and SATA. Comes with space for one or
two controllers, or MSA2000 3.5-inch disk Enclosure I/O modules (LFF
chassis only).
Drives available The new MSA2300sa G2 controller supports both the MSA2 3.5-inch
Large Form Factor (LFF) drives, or the HP ProLiant 2.5-inch Small
Form Factor (SFF) drive
Serial Attached SCSI (SAS) enterprise-class drives designed for high
volume, 24x7 usage. Serial-ATA (SATA) are usually reserved for
archival of data as they are both relatively inexpensive and are available
in very large capacities. The MSA2000 family of arrays can
accommodate both SAS and SATA drives within the same enclosure
making it ideal to have both business-critical, high activity files on SAS
drives while using snapshot or clone capability to keep back-up data on
the less expensive drives.
For investment protection, the MSA2300sa G2 controller will support
single port SAS & SATA drives in a single-domain MSA70. This support
allows current owners of MSA70s to migrate their single port drives (in
their MSA70 only) to be attached to an MSA2000sa G2. They can only
cascade to another single I/O MSA70. This is not a data-in-place
transition.
QuickSpecs
HP StorageWorks 2000sa G2 Modular Smart Array
Family Information
DA - 13331 Worldwide QuickSpecs — Version 2 — 7.31.2009 Page 6