Honeywell HCE 60 User Manual
Page 45
Assigning zones and issuing room names
43
The colors of LEDs 1 through 8 now provide information on a fault in
the temperature zones:
Off
No fault
Red
Cable break / no connection to setpoint adjuster
Green
No connection to Hometronic Manager resp. wireless
setpoint adjuster HCU 30
Orange
No connection to setpoint adjuster and Hometronic Man-
ager
The storey controller exits the fault display after approx. 60 seconds
and returns to normal mode.
Completing start-up
Closing setpoint adjuster
►
Replace cover and snap in both snap locks.
Handing over zoning plan
►
Hand over the completed zoning plan and the installation instructions
to the customer. Both documents are important, as changes to the
system may be made in future.