HP 2524 User Manual

Page 19

time [mm/dd/yy] [hh:mm:ss] [timezone <value>] [daylight-time-rule <value>] [begin-date
<mm/dd> end-date <mm/dd>]

This command display switch's date & time or optionally sets it.

Parameters:

 timezone <-1440..1440> - Sets the number of minutes your location is to the

West(+) or East(-) of GMT (default is 0).

 daylight-time-rule <alaska | none | continental-us-canada | middle-europe-

and-portugal | southern-hemisphere | western-europe | user-defined> -
Sets the daylight savings time rule for your location. None (default) means that no
time adjustment will be made.

 begin-date <mm/dd> end-date <mm/dd > - begin-date and end-date are only

valid if the daylight time rule is set to user-defined.

snmp-server [contact <sys-contact>] [location sys-location>]

Sets the switch contact and location for administrative purposes.

Parameters:

 contact <sys-contact> - Up to 48 characters. Name of the switch administrator.

 location <sys-location> - Up to 48 characters. Description of the switch location.

hostname <name-string>

Sets the switch name for administrative purposes.