HP BL260c - Manual (Page 30)

Hardware options installation 30
• The following table lists all supported combinations of single-rank, dual-rank, and quad-rank DIMM
configurations. "Single" indicates a slot/bank with a single-rank DIMM. "Dual" indicates a slot/bank
with a dual-rank DIMM. "Quad" indicates a slot/bank with a quad-rank DIMM.
Configuration Slot 1A Slot 2B Slot 3C Slot 4D Slot 5E Slot 6F
1 Single, Dual, or
Quad
— — — — —
2 Single Single — — — —
3 Single Single Single Single — —
4 Single Single Single Single Single Single
5 Dual Dual — — — —
6 Dual Dual Dual Dual — —
7 Dual Dual Dual Dual Dual Dual
8 Single Single Dual Dual — —
9 Dual Dual Single Single — —
10 Single Single Single Single Dual Dual
11 Single Single Dual Dual Dual Dual
12 Quad Quad — — — —
13 Dual Dual Quad Quad — —
14 Single Single Quad Quad — —
Installing DIMMs
1. Power down the server blade (on page 10 ).
2. Remove the server blade (on page 11 ).
3. Remove the access panel (on page 11 ).
4. Open the DIMM slot latches.
5. Install the DIMM.