Honeywell 9900 - Manual (Page 95)

Dolphin® Power Tools User’s Guide Rev A
8/6/08
5 - 17
Symbologies Section
The Symbologies section specifies the settings for each of the symbologies supported by the decoder.
The settings are in the form:
Symbology Name=Enable(1 or 0), Parm1, Parm2, Parm3, Parm4, Parm5, Parm6, Parm7, Parm8
Where
• Enable specifies that the symbology is enabled or disabled.
• Parms1–8 specify the settings for the symbology.
For more information regarding the individual settings for each of the symbologies, refer to the Honeywell
Decode API documentation in the SDK documentation.
Symbologies Settings
0=Disabled 1=Enabled
ScanWedge Entry Default Enabled/
Disabled Value Default Value
Australian Post 0=Disabled 0,0,0,0,0,0,0,0,0
Aztec Code 1=Enabled 1,1,3750,0,0,0,0,0,0
Aztec Mesas 0=Disabled 0,0,0,0,0,0,0,0,0
British Post 0=Disabled 0,0,0,0,0,0,0,0,0
Canadian Post 0=Disabled 0,0,0,0,0,0,0,0,0
China Post 0=Disabled 0,4,80,0,0,0,0,0,0
Codabar 1=Enabled 1,0,0,0,4,60,0,0,0
Codablock 0=Disabled 0,1,2048,0,0,0,0,0,0
Code 11 0=Disabled 0,1,4,80,0,0,0,0,0
Code 128/EAN 128 1=Enabled 1,0,80,0,0,0,0,0,0
Code 16K 0=Disabled 0,1,160,0,0,0,0,0,0
Code 32 0=Disabled 0,0,0,0,0,0,0,0,0
Code 39 1=Enabled 1,0,0,0,0,0,0,48,0
Code 49 0=Disabled 0,1,81,0,0,0,0,0,0
Code 93 0=Disabled 0,0,80,0,0,0,0,0,0